iMiniPlus PDF

iMiniPlus PDF Reusable Temperature Data Logger

iMiniPlus PDF : reusable temperature data logger

The iMiniPlus PDF is a data logger delivering advanced functionality and up-to-date software to improve temperature control for temperature-sensitive products.
The great advantage of this temperature logger is that no software is required in order to read the data, since a report is automatically generated. It is therefore extremely easy to use and satisfies any potential IT restrictions at the product destination.
The iMiniPlus PDF exists in a single-use version but also in reusable versions.

Features of the iMiniPlus PDF temperature data logger

The iMiniPlus PDF has an internal or external probe capable of measuring temperatures between -40°C and +70°C, and is one of the most reliable on the market with +/- 0.5°C accuracy between -40°C and -10°C and +/- 0.3°C between -10°C and +70°C.

Its compact size enables it to be inserted into any type of container : it measures 9 x 6 cm and weighs only 70 grams (including battery). The battery life is between one and two years, depending on how it is used, and the battery can be replaced by the user.

The iMiniPlus PDF temperature logger has 2 possible memory options: 8K (8048 readings) or 16K (16240 readings). Its measurement frequency ranges from 5 seconds to 18 hours, depending on the duration of the recording defined during programming (over 60 days).

The iMiniPlus PDF temperature data logger has an LCD screen which operates between -20°C and +70°C. Outside this temperature range, the data logger continues to log data.
2 alarm levels are possible (1 high alarm and 1 low alarm). It is also possible to deactivate the alarms and to programme the probe in record-only mode.

For the healthcare sector, we calibrate the loggers with 3-point NIST calibration. The calibration certificate is enclosed in paper format with the delivery of the logger and can also be sent by email in PDF format. The iMiniPlus PDF is therefore compliant with the FDA regulation 21 CFR Part 11 relating to electronic validation, signatures and records.

Use of the iMiniPlus PDF temperature data logger

The user can program the iMiniPlus PDF logger themselves (password, alarms, alarm trigger mode, recording time after the logger is started or start date, transportation duration, measurement frequency) by downloading the free Console Pro software (see bottom of the page or in the Downloadable Software section).

To start the logger, press on the START button for a few seconds until the STOP message disappears. At the end of the recording, you simply press on the STOP button for a few seconds to stop it. The multifunctional LCD screen then provides several levels of information :

  • The highest temperature, the lowest temperature and the average temperature recorded
  • Any alarms triggered (high and/or low)
  • The time spent outside alarm ranges
  • Battery depletion

In order to retrieve data from the iMiniPlus PDF, connect the logger to a computer using a USB/mini USB cable (not included). Simply save the PDF file generated by the logger. The data can also be exported to CSV or TXT formats.

Two Years Warranty Reusable Data Logger
iMiniPlus PDF Reusable Temperature Data Logger Graph 1
iMiniPlus PDF Reusable Temperature Data Logger Graph 2

Our product references


Item Code



Sensor Location



Single Use










Share This